top of page

LM-60 Fluid Coating

GacoFlex LM-60 

GacoFlex LM-60 is a 100% solids liquid applied two component coating that cures into a water resistant polyurethane elastomeric membrane.

 

LM-60H is designed for application on horizontal and low slope surfaces, at the rate of at least four gallons per 100 square feet (15.14 L / 9.3 m²), to yield a 1/16" (.16 cm) thick membrane. LM-60V is designed for the same application rate and yield on vertical surfaces.

 

USAGE

Intended primarily for use as a high build waterproofing membrane over concrete, metal and plywood. GacoFlex LM-60 has ANSI NSF Standard 61 compliance to line potable water storage tanks 10,000 gallons and over. When GacoFlex E-5320 is used as a primer, LM-60 has ANSI NSF Standard 61 compliance to line potable water storage tanks 10,000 gallons and over. For non-potable water facilities where pH is less than 6.5 an acid resistant version of LM-60 is available for use.

 

 

For more information on LM-60 Fluid Coating, please contact us.

 

Birkshire Developments Inc. are qualified and certified applicators of Gaco Western products.

bottom of page